Master Pack Includes everything necessary to terminate 500 jacks in the work area or at the telecommunication rack. The durable HDPE resealable bucket includes: 500 MT Series Keystone Jacks, one MT-Series termination tool, Organizer tray, and a Signamax T-Shirt.
The Signamax Category 6A Unscreened MT-Series Keystone Jacks have been designed to meet the need for today’s high bandwidth applications. These connectors are slim in profile for the highest density applications and have the ability to mount either color-coded icons for service identification or dust covers to protect unused jacks from dust and other contaminants.
Special design features allow these jacks to be terminated with a standard 110 single-position tool or with the Signamax four-pair tool. The contact design provides enhanced plug-to-jack connection integrity, protects against damage caused by insertion of 4- or 6-position plugs, and is rated for a minimum of 750 plug insertions providing for the highest level of system reliability.
Key Features
- Exceed ANSI/TIA-568-C.2 component performance specifications
- Meets IEEE 802.3an 10 Gigabit Ethernet transmission requirements
- Eliminates alien crosstalk with solid-metal cable-retention cap
- Slim profile for the highest density applications
- Improved wire retention and ease of termination with rear 110 type contacts
- Easy-to-read T568A/B wiring scheme color-coded label
- Circuit identification icons, dust covers, and 110 protection caps included in kit
Specifications
TRANSMISSION PERFORMANCE
- ANSI/TIA-568-C.2: meets or exceeds category 6A (1-500 MHz) component specifications
TRANSMISSION MEDIA
- Unscreened twisted pair (U/UTP)
JACK TYPE
- 8p8c (8-position, 8-contact) “RJ45” style
WIRING SCHEME
- ANSI/TIA-568-C.2: T568A & T568B
- ISO/IEC 11801 2nd Ed.: 8-position pin/pair assignment (1-2/3-6/4-5/7-8)
WIRE GAUGE
- 22 to 24 AWG (0.644 to 0.511 mm)
ELECTRICAL
- Insulation Resistance: Min 500 MOhm @ 100 Vdc
- Dielectric Withstanding Voltage: 1,000 Vdc/ac peak contact-to-contact @ 60 Hz for 1 min
- Spring Wire Contact Resistance: Max 20 mOhm
- IDC Contact Resistance: Max 2.5 mOhm
- Current Rating: Refer to downloadable spec sheet.
CONSTRUCTION
- Housing: High impact thermoplastic, UL94V-0 fire retardant
- Jack Spring Wire: Phosphor bronze alloy plated with 50 μin of gold over 70 to 100 μin of nickel
- IDC: 110 type, phosphor bronze alloy with 100 μin 100% tin alloy
MECHANICAL
- Total Contact Force: Min 800 g for 8 wire leads
- Retention: 50 N (11 lbf) for 60 ± 5 s
- Mating Cycle Life: Min 750 cycles
FOOTPRINT
- Standard keystone footprint
MOUNTING DIMENSIONS:
- 1.213” D x 0.665” W x 0.76” H (30.8 mm x 16.9 mm x 19.3 mm)
ENVIRONMENTAL CONDITIONS
- Operating Temperature: 14 °F to 140 °F (-10 °C to 60 °C)
- Storage Temperature: -40 °F to 158 °F (-40 °C to 70 °C)
- Operating RH: 93% Max (non-condensing)
COMPLIANCE
- ANSI/TIA-568-C.2, IEEE 802.3 ab, FCC Part 68 Subpart F, UL 94V-0
APPLICATIONS
- X.21, V.11, S0, ISDN, CSMA/CD 10BASE-T, 100BASE-TX, 100BASE-T4, 100BASE-T2, 1000BASE-T, 10GBASE-T, TR 4/16/100, 100BASE-VG, ATM LAN 25/51/155, TP-PMD
WARRANTY
- 5-year Limited Component
- 10-year Signamax Base Trunk
- 15-year Signamax Extended Component
- 25-year Signamax Cabling System