10/100TX to 100FX Media Converter with USB Power Option LC/MM, 2 km - Signamax FO-065-1174LFS

The Signamax 10/100 to 100FX Media Converters with USB Power Option provides a built-in 10/100 switch that enables the fiber cable connection to operate at 100 Mbps, while remaining completely 100BaseFX standard-compliant for the fiber optic connection. The fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex legacy hub. The built-in switch and its store-and forward switching architecture performs the network segmentation that allows the maximum fiber distance extension.

An USB power connector on the rear panel provides additional power options where AC power outlets are unavailable. The Link Fault Signaling provides a means of propagating a link drop on either port of the media converter to the other port, enabling a connected managed switch to see the link drop and respond to it using Spanning Tree Protocol or another recovery scheme.  This intelligence maximizes the power of managed switches, and enables fail-safe design solutions for complex networks.

Key Features

• Available with SC, ST, MT-RJ, and LC connectors
• DIP switch configuration for link fault signalling and fiber auto/force mode
• Built-In 10/100BaseT/TX switch utilizes store-and-forward architecture
• USB power option for added convenience
• Supports wall mounting, DIN-rail mounting or use with media converter rack mount chassis

Specifications

APPLICABLE STANDARDS

• IEEE 802.3 10BaseT
• IEEE 802.3u 100BaseTX
• IEEE 802.3u 100BaseFX

PORTS

• 1 – RJ-45 10/100BaseT/TX Auto-Negotiation, Auto-MDI/MDIX port plus
• 1 – fiber optic 100BaseFX port with varying connectors and span per P/N

LED STATUS INDICATORS

• Per Unit: Power
• Per RJ-45 Port: Link/Activity, Full Duplex/Collision (FDX/COL); RJ-45 port speed
• Per Fiber Port: Link/Activity, Full Duplex/Collision (FDX/COL)

PERFORMANCE

• Latency: < 4.2 μs (LIFO)
• Throughput, per port: @ 100Base: 148,809 pps (64-byte packets)
• Speed: 100BaseTX: 100/200 Mbps for half/full duplex; 10BaseT: 10/20 Mbps for half/full duplex
• MAC Address Capacity: 1K; Memory: 256 KB

FIBER INTERFACE

• Multimode P/Ns
• Type: LED
• Wavelength: 1300 nm nominal (1270 nm max.,1355 nm min.)
• Max Output Power: -14.0 dBm
• Min Output Power: -20.0 dBm
• Sensitivity: -33.0 dBm
• Max Input Power: -8.0 dBm
• Link Power Budget: 13.0 dB

• Singlemode P/Ns
• Type: MQW Laser
• Wavelength:
• 1300 nm nominal (1260 nm max.,1360 nm min.)
• Max Output Power: -7.0 dBm
• Min Output Power: -15.0 dBm
• Sensitivity: -34.0 dBm
• Max Input Power: -7.0 dBm
• Link Power Budget: 19.0 dB

ELECTRICAL CHARACTERISTICS

• 12 V DC. External 100 – 240 V AC 50/60 Hz. Power supply included.
• USB power connector on the rear panel optionally powers converter from computer’s USB port

ENVIRONMENTAL REQUIREMENTS

• Operating Temperature: 32°F ~ 104°F (0°C ~ 40°C)
• Storage Temperature: -13°F ~ 158°F (-25°C ~ 70°C)
• Relative Humidity: 10 ~ 90%, non-condensing

PHYSICAL CHARACTERISTICS

• Dimensions: 4.33” L x 3.16” W x 0.91” H (109.2 mm x 83 mm x 23.8 mm)
• Weight: 0.33 lb (150 g)

CERTIFICATIONS

• CE, FCC, ROHS, VCCI Class A

WARRANTY

• Limited Lifetime