The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch).
**CLOSEOUT**
Product |
|
Title |
NP2X |
Connection Type |
Plug |
Gender |
male |
Electrical |
|
Contact resistance |
depends on mating connector mΩ |
Dielectric strength |
1 kVdc |
Insulation resistance |
> 2 (initial) GΩ ≥ 1 GΩ (after damp heat test) |
Rated current per contact |
depends on mating connector A |
Rated voltage |
< 50 V |
Mechanical |
|
Cable O.D. |
4 - 7 mm |
Lifetime |
> 1000 mating cycles |
Wiresize |
1 mm² |
Wiresize |
18 AWG |
Wiring |
Solder contacts |
Material |
|
Bushing |
Polyacetal (POM) + PU |
Contact plating |
2 µm Ni (Su) |
Contacts |
Brass (CuZn39Pb3) |
Insert |
Polyamide (PA 6.6 30 % GR) |
Shell |
Zinc diecast (ZnAl4Cu1) |
Shell plating |
Nickel |
Strain relief |
Polyacetal (POM) |
Environmental |
|
Standard compliance |
IEC 60603-11 / EIA RS-453 |
Solderability |
Complies with IEC 68-2-20 |
Temperature range |
-20 °C to +65 °C |