The ST-MPA24 contains two identical phantom power circuits and a common power supply input. If only one mic input is to be converted for phantom operation, only one circuit needs to be used. Each circuit has a mic input and a mic output. Phantom voltage appears on each of the mic input terminals. There is no voltage on the mic output terminals. Therefore, the ST-MPA24 can convert any existing mic input into a phantom powered input. Module operation is from a 24 Vdc ground referenced power supply. The ST-MPA24 has an internal pass transistor-regulator filter circuit which permits this incoming voltage to be adjusted to the desired phantom voltage, up to 92% of the supply input voltage. A multi-turn trimming potentiometer is provided to reduce the phantom voltage if desired. In the default fully clockwise position, the ST-MPA24 provides "P24" 24 Vdc phantom voltage conformant to IEC 61938. |
SKU: RDLSR-10
Manufacturer: RDL
SKU: RDLSR-12A
Manufacturer: RDL
SKU: RDLST-PBR4
Manufacturer: RDL
SKU: RDLST-RRB1
Manufacturer: RDL
SKU: RDLSTR-19A
Manufacturer: RDL
SKU: RDLSTR-19B
Manufacturer: RDL
SKU: RDLSTR-H6A
Manufacturer: RDL
SKU: RDLSR-4
Manufacturer: RDL
SKU: RDLST-MX2
Manufacturer: RDL
SKU: RDLST-UMX3
Manufacturer: RDL
SKU: RDLST-MPA48
Manufacturer: RDL
SKU: RDLFP-MPA2
Manufacturer: RDL
SKU: RDLEZ-MPA2
Manufacturer: RDL
SKU: RDLEZ-MPA1
Manufacturer: RDL
SKU: RDLST-MPA24
Security Is Our Concern
We take great care in keeping up to date with security measures.