10/100/1000TX to 1000LX Media ConverterSC/SM, 20 km - Signamax FO-065-1196ALXED

The Signamax 10/100/1000 to 1000 SX/LX Switching Media Converters provide an intelligent solution for long distance connections between legacy 10BaseT and 100BaseTX networks and 1000Base Gigabit Ethernet networks. The built-in switch enables the fiber cable connection to operate at 1000 Mbps connected to either a 10BaseT, 100BaseTX, or a 1000BaseT network, while remaining completely 1000BaseSX or 1000BaseLX standard-compliant for the fiber optic connection. The fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex legacy hub.

Improvements in the this series of media converters include: extremely low latency, the ability to force the RJ-45 port to 100Base or 10Base full or half-duplex modes, provide auto-negotiation on the 1000Base fiber port or forced full-duplex mode where required, and the enabling or disabling of the Link Fault Signaling feature.

Application Reference: Security Camera Network, Extended Over Fiber (PDF 477 Kb) Revised 07-27-2016

Key Features

• Extremely low latency supports larger multi-hop networks
• Extremely high reliability; MTBF of over 112 years
• Gigabit transmission supports 9K bytes jumbo frames
• IEEE 802.3x flow control for full duplex and back pressure for half duplex supported
• DIP switch configuration for link fault signalling, fiber auto/force mode, and SFP speed
• Full wire-speed forwarding rate
• Supports wall mounting, DIN-rail mounting or use with media converter rack mount chassis

Specifications

APPLICABLE STANDARDS

• IEEE 802.3 10BaseT
• IEEE 802.3u 100BaseTX
• IEEE 802.3ab 1000BaseT
• IEEE 802.3z 1000BaseSX
• IEEE 802.3z 1000BaseLX
• IEEE 802.3x Flow Control

PORTS

• 1 – RJ-45 10/100/10000BaseT/TX port.
• 1 -1000BaseSX or 1000BaseLX fiber optic port.

LED STATUS INDICATORS

• Per Unit: Power; LFS Status; Full Duplex
• Per RJ-45 Port: Link Copper; Copper port speed (Green = 1000 Mbps, Amber = 100 Mbps, off = 10 Mbps)
• Per Fiber Port: Link Fiber

PERFORMANCE

• Latency: ≤1.5 μs (FIFO).
• MTBF: 985,339.89 hours (112.48 years), calculated via the Part Stress Analysis Method.
• Throughput, per port: @ 1000Base: 1,488,100 pps (64-byte packets); @ 100Base: 148,810 pps (64-byte packets)
• Switch Fabric Speed: 4.0 Gbps (non-blocking, wire speed performance)
• Frame Buffer: 12K total
• Jumbo Frame Support: 9K packets supported

DIP SWITCH SETTINGS

FIBER INTERFACE

• Type:
• P/Ns 065-1196A/1196AED: Laser Diode
• P/Ns 065-1196ALX/1196ALXED: MQW Laser
• Wavelength:
• P/N 065-1196A: 850 nm nominal (830 nm max.,860 nm min.)
• P/N 065-1196AED: 1310 nm nominal (1270 nm max.,1355 nm min.)
• P/N 065-1196ALX: 1300 nm nominal (1270 nm max.,1355 nm min.)
• P/N 065-1196ALXED: 1300 nm nominal (1261 nm max.,1360 nm min.)
• Max Output Power:
• P/N 065-1196A: -4.0 dBm
• P/N 065-1196AED: 0.0 dBm
• P/Ns 065-1196ALX/1196ALXED: -3.0 dBm
• Min Output Power:
• P/N 065-1196A: -9.5 dBm
• P/N 065-1196AED: -6.0 dBm
• P/N 065-1196ALX: -11.0 dBm
• P/N 065-1196ALXED: -8.0 dBm
• Sensitivity:
• P/N 065-1196A: -13.5 dBm
• P/N 065-1196AED: -17.0 dBm
• P/Ns 065-1196ALX/1196ALXED: -22.0 dBm
• Max Input Power:
• P/N 065-1196A: -13.5 dBm
• P/N 065-1196AED: 0.0 dBm
• P/Ns 065-1196ALX/1196ALXED: -3.0 dBm
• Link Power Budget:
• P/N 065-1196A: 4.0 dB
• P/N 065-1196AED/ 1196ALX: 11.0 dB
• P/N 065-1196ALXED: 14.0 dB

ELECTRICAL CHARACTERISTICS

• 12 V DC. External 100 – 240 V AC 50/60 Hz. Power supply included.

ENVIRONMENTAL REQUIREMENTS

• Operating Temperature: 32°F to 122°F (0°C to 50°C)
• Storage Temperature: -14°F to 158°F (-10°C to 70°C)
• Relative Humidity: 5% to 95% (non-condensing)

PHYSICAL CHARACTERISTICS

• Dimensions: 4.33” L x 3.16” W x 0.91” H (109.2 mm x 83 mm x 23.8 mm)
• Weight: 0.33 lb (150 g)

CERTIFICATIONS

• CE, FCC, ROHS, VCCI Class A

WARRANTY

• Limited Lifetime