Three Input Format-A Source Selector - Black - Radio Design Labs DB-TPRX3A

Name: Three Input Format-A Source Selector - Black - Radio Design Labs DB-TPRX3A
Brand: RDL
SKU: RDLDB-TPRX3A
Price: 275.2 USD
Availability: PreOrder

SKU: RDLDB-TPRX3A

Manufacturer: RDL

Not Rated Yet

MSRP: $366.93

Price: $275.20

Save $91.73 off MSRP

Price / COM_VIRTUEMART_UNIT_SYMBOL_each:

Ships from manufacturer

Three Input Format-A Source Selector - Black

My Project List

Description
Documents
Reviews
Accessories
Related Products
Diagram

The D SERIES-TPRX3A is a three-pair audio receiving and switching module compatible with RDL Format-A twisted pair products. Three audio sources are available, corresponding to the three signal pairs A, B and C. The front panel of the -TPRX3A features three pushbuttons, each corresponding to one of three inputs. When a button is pushed, the corresponding audio input is fed to the output and any previously selected source is shut off. Only one source may be selected at a time. If the button for a selected source is pushed again, all inputs are turned off. An LED adjacent to each button shows which source is selected.

When a -TPRX3A is not being used, its display switches to a dim intensity to avoid being a visual distraction. The display returns to a bright intensity when a button is pushed. In the event of power loss, internal non-volatile memory stores the last source selected. When power is restored, the -TPRX3A will return to the source that was active when power was lost.

The D SERIES-TPRX3A was designed for absolute silent switching of audio signals. It provides a balanced line-level output that may be connected unbalanced.

The -TPRX3A features bridging inputs, allowing it to be connected to the LOOP OUT jack of other receivers. The bridging input circuits used in all FORMAT-A twisted pair receivers allow connection of up to 10 receivers for each cable pair. The possibility of multiple receiver locations adds enormous flexibility in the design of audio monitoring systems using RDL FORMAT-A products.

The -TPRX3A may be powered directly from a 24 Vdc power supply using either the power jack or the detachable terminal block. Local power connected to the module is also fed to all modules connected to the INPUT RJ45 jack. The -TPRX3A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable.

The D SERIES-TPRX3A remote controls are constructed on a steel frame. The electronics are fully protected within the rear enclosure. Use them with RDL wall-mounted accessories as part of a complete audio/video system.

Specifications

Input:

RDL FORMAT-A

Input Connection:

RJ45

Format-A Signal Pairs Used (3):

A, B, C

Front-Panel Switches:

Momentary pushbuttons (3, 1 per input)

Front-Panel Indicators (3):

Selected channel

Output:

150 Ω balanced

Output Connection:

Detachable terminal block

Output Level:

+4 dBu Line level, nominal

Format-A Output:

RJ45 (loop-through)

Frequency Response:

10 Hz to 20 kHz (± 0.5 dB)

THD+N:

< 0.005% (1 kHz); <0.05% (20 Hz to 20 kHz)

Noise below +4 dBu:

< -85 dB

Off Attenuation:

< 90 dB (1 kHz); < 70 dB (20 Hz to 20 kHz)

Headroom above +4 dBu:

> 18 dB

CMRR:

> 80 dB (50 Hz to 150 Hz)

Power Connections (2):

Detachable terminal block; RJ45

Ambient Operating Environment:

0° C to 55° C

Power Requirement:

24 Vdc @ 45 mA plus connected loads

Dimensions:

1.6" (4.06 cm) W; 4.11" (10.45 cm) H; 1.89" (4.8 cm) D

Mounting Box Minimum Depth:

2.4"

Package Type:

Cardboard Box

Package Dimensions:

3.625 x 4.625 x 2.125 in.

Shipping Weight:

.385 lbs

WEEE weight:

.245 lbs.

Tariff code:

8543.70.9960

Datasheet

Write Review

There are yet no reviews for this product.

Accessories

25^%
OFF

Three Input Format-A Source Selector - Black - Radio Design Labs DB-TPRX3A

Single Cover Plate - gray - Radio Design Labs CP-1G

SKU: RDLCP-1G

Manufacturer: RDL

25^%
OFF

Single Cover Plate - stainless steel - Radio Design Labs CP-1S

SKU: RDLCP-1S

Manufacturer: RDL

25^%
OFF

Double Gang Wall Plate Cover / Face Plate, White - Radio Design Labs CP-2

SKU: RDLCP-2

Manufacturer: RDL

25^%
OFF

Double Gang Wall Plate Cover / Face Plate, Grey - Radio Design Labs CP-2G

SKU: RDLCP-2G

Manufacturer: RDL

25^%
OFF

Double Gang Wall Plate Cover / Face Plate, Stainless Steel - Radio Design Labs CP-2S

SKU: RDLCP-2S

Manufacturer: RDL

25^%
OFF

Triple Cover Plate - white - Radio Design Labs CP-3

SKU: RDLCP-3

Manufacturer: RDL

25^%
OFF

Triple Cover Plate - gray - Radio Design Labs CP-3G

SKU: RDLCP-3G

Manufacturer: RDL

25^%
OFF

Triple Cover Plate - stainless steel - Radio Design Labs CP-3S

SKU: RDLCP-3S

Manufacturer: RDL

25^%
OFF

Quad Cover Plate - white - Radio Design Labs CP-4

SKU: RDLCP-4

Manufacturer: RDL

25^%
OFF

Quad Cover Plate - gray - Radio Design Labs CP-4G

SKU: RDLCP-4G

Manufacturer: RDL

25^%
OFF

Quad Cover Plate - stainless steel - Radio Design Labs CP-4S

SKU: RDLCP-4S

Manufacturer: RDL

25^%
OFF

Single Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels - gray - Radio Design Labs DC-1G

SKU: RDLDC-1G

Manufacturer: RDL

25^%
OFF

Single Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels - white - Radio Design Labs DC-1W

SKU: RDLDC-1W

Manufacturer: RDL

25^%
OFF

Double Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels - gray - Radio Design Labs DC-2G

SKU: RDLDC-2G

Manufacturer: RDL

25^%
OFF

Double Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels - white - Radio Design Labs DC-2W

SKU: RDLDC-2W

Manufacturer: RDL

25^%
OFF

Triple Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels - gray - Radio Design Labs DC-3G

SKU: RDLDC-3G

Manufacturer: RDL

25^%
OFF

Triple Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels - white - Radio Design Labs DC-3W

SKU: RDLDC-3W

Manufacturer: RDL

25^%
OFF

Quadruple Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels - gray - Radio Design Labs DC-4G

SKU: RDLDC-4G

Manufacturer: RDL

25^%
OFF

Quadruple Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels - white - Radio Design Labs DC-4W

SKU: RDLDC-4W

Manufacturer: RDL

25^%
OFF

Rack Mount for 3 Decora® Modules - 1 RU - Radio Design Labs RM-D3

SKU: RDLRM-D3

Manufacturer: RDL

25^%
OFF

Rack Mount for 9 Decora® Modules - 3 RU - Radio Design Labs RM-D9

SKU: RDLRM-D9

Manufacturer: RDL

25^%
OFF

Single Surface Mount Box for Decora® Remote Controls and Panels - gray - Radio Design Labs SMB-1G

SKU: RDLSMB-1G

Manufacturer: RDL

25^%
OFF

Single Surface Mount Box for Decora® Remote Controls and Panels - white - Radio Design Labs SMB-1W

SKU: RDLSMB-1W

Manufacturer: RDL

25^%
OFF

Double Surface Mount Box for Decora® Remote Controls and Panels - gray - Radio Design Labs SMB-2G

SKU: RDLSMB-2G

Manufacturer: RDL

25^%
OFF

Double Surface Mount Box for Decora® Remote Controls and Panels - white - Radio Design Labs SMB-2W

SKU: RDLSMB-2W

Manufacturer: RDL

25^%
OFF

Triple Surface Mount Box for Decora® Remote Controls and Panels - gray - Radio Design Labs SMB-3G

SKU: RDLSMB-3G

Manufacturer: RDL

25^%
OFF

Triple Surface Mount Box for Decora® Remote Controls and Panels - white - Radio Design Labs SMB-3W

SKU: RDLSMB-3W

Manufacturer: RDL

25^%
OFF

Quadruple Surface Mount Box for Decora® Remote Controls and Panels - gray - Radio Design Labs SMB-4G

SKU: RDLSMB-4G

Manufacturer: RDL

25^%
OFF

Quadruple Surface Mount Box for Decora® Remote Controls and Panels - white - Radio Design Labs SMB-4W

SKU: RDLSMB-4W

Manufacturer: RDL

25^%
OFF

Universal Wall Box - Single - Mounts RDL Remotes - Radio Design Labs WB-1U

SKU: RDLWB-1U

Manufacturer: RDL

25^%
OFF

Universal Wall Box - Double - Mounts RDL Remotes - Radio Design Labs WB-2U

SKU: RDLWB-2U

Manufacturer: RDL

Related Products

25^%
OFF

Active Distributor - Twisted Pair Format-A - RDL Format-A input to Four outputs - Radio Design Labs RU-TPDA

SKU: RDLRU-TPDA

Manufacturer: RDL

25^%
OFF

Active Sender / Distributor - Twisted Pair Format-A - Three audio inputs to Four outputs - Radio Design Labs RU-TPS4A

SKU: RDLRU-TPS4A

Manufacturer: RDL

25^%
OFF

Active Single-Pair Receiver - Twisted Pair Format-A - balanced line output - Radio Design Labs TX-TPR1A

SKU: RDLTX-TPR1A

Manufacturer: RDL

25^%
OFF

Active Single-Pair Receiver - Twisted Pair Format-A - XLR mic/line output - Stainless - Radio Design Labs DS-TPR1A

SKU: RDLDS-TPR1A

Manufacturer: RDL

25^%
OFF

Active Single-Pair Receiver - Twisted Pair Format-A - XLR mic/line output - Radio Design Labs D-TPR1A

SKU: RDLD-TPR1A

Manufacturer: RDL

25^%
OFF

Active Single-Pair Sender - Twisted Pair Format-A - balanced line input - Radio Design Labs TX-TPS1A

SKU: RDLTX-TPS1A

Manufacturer: RDL

25^%
OFF

Active Single-Pair Sender - Twisted Pair Format-A - XLR mic input w phantom - Radio Design Labs D-TPS1A

SKU: RDLD-TPS1A

Manufacturer: RDL

25^%
OFF

Active Three-Pair Receiver - Twisted Pair Format-A - balanced line outputs - Radio Design Labs TX-TPR3A

SKU: RDLTX-TPR3A

Manufacturer: RDL

25^%
OFF

Active Three-Pair Receiver - Twisted Pair Format-A - XLR & stereo phono out - Stainless - Radio Design Labs DS-TPR3A

SKU: RDLDS-TPR3A

Manufacturer: RDL

25^%
OFF

Active Three-Pair Receiver - Twisted Pair Format-A - XLR and stereo phono outputs - Radio Design Labs D-TPR3A

SKU: RDLD-TPR3A

Manufacturer: RDL

25^%
OFF

Active Three-Pair Sender - Twisted Pair Format-A - balanced line inputs - Radio Design Labs TX-TPS3A

SKU: RDLTX-TPS3A

Manufacturer: RDL

25^%
OFF

Active Three-Pair Sender - Twisted Pair Format-A - XLR mic & stereo phono in - Stainless - Radio Design Labs DS-TPS3A

SKU: RDLDS-TPS3A

Manufacturer: RDL

25^%
OFF

Active Three-Pair Sender - Twisted Pair Format-A - XLR mic & stereo phono in - Radio Design Labs D-TPS3A

SKU: RDLD-TPS3A

Manufacturer: RDL

25^%
OFF

Active Two-Pair Receiver - Twisted Pair Format-A - stereo phono jack outputs - Stainless - Radio Design Labs DS-TPR2A

SKU: RDLDS-TPR2A

Manufacturer: RDL

25^%
OFF

Active Two-Pair Sender - Twisted Pair Format-A - stereo phono jack inputs - Stainless - Radio Design Labs DS-TPS2A

SKU: RDLDS-TPS2A

Manufacturer: RDL

25^%
OFF

Active Two-Pair Sender - Twisted Pair Format-A - stereo phono jack inputs - Radio Design Labs D-TPS2A

SKU: RDLD-TPS2A

Manufacturer: RDL

25^%
OFF

Passive Single-Pair Receiver - Twisted Pair Format-A - balanced line output - Radio Design Labs TX-TPR6A

SKU: RDLTX-TPR6A

Manufacturer: RDL

25^%
OFF

Passive Single-Pair Sender - Twisted Pair Format-A - balanced line input - Radio Design Labs TX-TPS6A

SKU: RDLTX-TPS6A

Manufacturer: RDL

25^%
OFF

Power Inserter - Twisted Pair - 1 set of outputs - signal loop-through - Radio Design Labs TX-TP1PW

SKU: RDLTX-TP1PW

Manufacturer: RDL

25^%
OFF

Power Inserter - Twisted Pair - four sets of outputs - signal loop-through - Radio Design Labs FP-TP4PW

SKU: RDLFP-TP4PW

Manufacturer: RDL

25^%
OFF

Power Inserter - Twisted Pair - four sets of outputs - signal loop-through - Radio Design Labs RU-TP4PW

SKU: RDLRU-TP4PW

Manufacturer: RDL

25^%
OFF

Three Input Format-A Source Selector - SS - Radio Design Labs DS-TPRX3A

SKU: RDLDS-TPRX3A

Manufacturer: RDL

25^%
OFF

Three Input Format-A Source Selector - Radio Design Labs D-TPRX3A

SKU: RDLD-TPRX3A

Manufacturer: RDL

Three Input Format-A Source Selector - Black - Radio Design Labs DB-TPRX3A

Specifications

There are yet no reviews for this product.

Accessories

Single Cover Plate - gray - Radio Design Labs CP-1G

Single Cover Plate - stainless steel - Radio Design Labs CP-1S

Double Gang Wall Plate Cover / Face Plate, White - Radio Design Labs CP-2

Double Gang Wall Plate Cover / Face Plate, Grey - Radio Design Labs CP-2G

Double Gang Wall Plate Cover / Face Plate, Stainless Steel - Radio Design Labs CP-2S

Triple Cover Plate - white - Radio Design Labs CP-3

Triple Cover Plate - gray - Radio Design Labs CP-3G

Triple Cover Plate - stainless steel - Radio Design Labs CP-3S

Quad Cover Plate - white - Radio Design Labs CP-4

Quad Cover Plate - gray - Radio Design Labs CP-4G

Quad Cover Plate - stainless steel - Radio Design Labs CP-4S

Single Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels - gray - Radio Design Labs DC-1G

Single Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels - white - Radio Design Labs DC-1W

Double Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels - gray - Radio Design Labs DC-2G

Double Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels - white - Radio Design Labs DC-2W

Triple Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels - gray - Radio Design Labs DC-3G

Triple Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels - white - Radio Design Labs DC-3W

Quadruple Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels - gray - Radio Design Labs DC-4G

Quadruple Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels - white - Radio Design Labs DC-4W

Rack Mount for 3 Decora® Modules - 1 RU - Radio Design Labs RM-D3

Rack Mount for 9 Decora® Modules - 3 RU - Radio Design Labs RM-D9

Single Surface Mount Box for Decora® Remote Controls and Panels - gray - Radio Design Labs SMB-1G

Single Surface Mount Box for Decora® Remote Controls and Panels - white - Radio Design Labs SMB-1W

Double Surface Mount Box for Decora® Remote Controls and Panels - gray - Radio Design Labs SMB-2G

Double Surface Mount Box for Decora® Remote Controls and Panels - white - Radio Design Labs SMB-2W

Triple Surface Mount Box for Decora® Remote Controls and Panels - gray - Radio Design Labs SMB-3G

Triple Surface Mount Box for Decora® Remote Controls and Panels - white - Radio Design Labs SMB-3W

Quadruple Surface Mount Box for Decora® Remote Controls and Panels - gray - Radio Design Labs SMB-4G

Quadruple Surface Mount Box for Decora® Remote Controls and Panels - white - Radio Design Labs SMB-4W

Universal Wall Box - Single - Mounts RDL Remotes - Radio Design Labs WB-1U

Universal Wall Box - Double - Mounts RDL Remotes - Radio Design Labs WB-2U

Related Products

Active Distributor - Twisted Pair Format-A - RDL Format-A input to Four outputs - Radio Design Labs RU-TPDA

Active Sender / Distributor - Twisted Pair Format-A - Three audio inputs to Four outputs - Radio Design Labs RU-TPS4A

Active Single-Pair Receiver - Twisted Pair Format-A - balanced line output - Radio Design Labs TX-TPR1A

Active Single-Pair Receiver - Twisted Pair Format-A - XLR mic/line output - Stainless - Radio Design Labs DS-TPR1A

Active Single-Pair Receiver - Twisted Pair Format-A - XLR mic/line output - Radio Design Labs D-TPR1A

Active Single-Pair Sender - Twisted Pair Format-A - balanced line input - Radio Design Labs TX-TPS1A

Active Single-Pair Sender - Twisted Pair Format-A - XLR mic input w phantom - Radio Design Labs D-TPS1A

Active Three-Pair Receiver - Twisted Pair Format-A - balanced line outputs - Radio Design Labs TX-TPR3A

Active Three-Pair Receiver - Twisted Pair Format-A - XLR & stereo phono out - Stainless - Radio Design Labs DS-TPR3A

Active Three-Pair Receiver - Twisted Pair Format-A - XLR and stereo phono outputs - Radio Design Labs D-TPR3A

Active Three-Pair Sender - Twisted Pair Format-A - balanced line inputs - Radio Design Labs TX-TPS3A

Active Three-Pair Sender - Twisted Pair Format-A - XLR mic & stereo phono in - Stainless - Radio Design Labs DS-TPS3A

Active Three-Pair Sender - Twisted Pair Format-A - XLR mic & stereo phono in - Radio Design Labs D-TPS3A

Active Two-Pair Receiver - Twisted Pair Format-A - stereo phono jack outputs - Stainless - Radio Design Labs DS-TPR2A

Active Two-Pair Sender - Twisted Pair Format-A - stereo phono jack inputs - Stainless - Radio Design Labs DS-TPS2A

Active Two-Pair Sender - Twisted Pair Format-A - stereo phono jack inputs - Radio Design Labs D-TPS2A

Passive Single-Pair Receiver - Twisted Pair Format-A - balanced line output - Radio Design Labs TX-TPR6A

Passive Single-Pair Sender - Twisted Pair Format-A - balanced line input - Radio Design Labs TX-TPS6A

Power Inserter - Twisted Pair - 1 set of outputs - signal loop-through - Radio Design Labs TX-TP1PW

Power Inserter - Twisted Pair - four sets of outputs - signal loop-through - Radio Design Labs FP-TP4PW

Power Inserter - Twisted Pair - four sets of outputs - signal loop-through - Radio Design Labs RU-TP4PW

Three Input Format-A Source Selector - SS - Radio Design Labs DS-TPRX3A

Three Input Format-A Source Selector - Radio Design Labs D-TPRX3A

Shop By Category

Recently Viewed

Three Input Format-A Source Selector - Black - Radio Design Labs DB-TPRX3A

Shop Securely