Cat 6A F/UTP 28 AWG White Snag-Proof Boot, 3 FT. - Signamax C6AS-328WH-3FB

The Signamax Category 6A Screened Patch Cords have been designed to be slim but still meet the need for today’s high-bandwidth applications. These patch cords incorporate a slim profile snag-free boot design which protects the plug latch and offers greater flexibility. The cords are 100% transmission tested and support category 6A component level performance.

Manufactured using ETL verified 28 AWG stranded cable design to support a greater service life. Assembled in a controlled environment to ensure consistent quality, these patch cords provide reliable performance when mated with any category 6A connecting hardware and deliver supreme performance for network cabling systems.

Key Features

• Slimmer diameter offers additional flexibility & easier routing through cable management
• Protection against ANEXT & EMI
• 100% factory tested per ANSI/TIA-568-C.2 to ensure category 6A component performance
• Supports performance of Power over Ethernet
• ETL verified screened 28 AWG stranded cable
• Snagless design protects the plug latch
• Meets IEEE 802.3an 10-Gigabit Ethernet transmission requirements

Specifications

TRANSMISSION PERFORMANCE

• ANSI/TIA-568-C.2: meets or exceeds category 6A (1-500 MHz) specifications

TRANSMISSION MEDIA

• 4-pair stranded Unscreened Foil-screened Twisted Pairs.
• Individually foil-screened twisted pairs under overall sheath (U/FTP)

WIRING SCHEME

• ANSI/TIA-568-C.2: T568A & T568B
• ISO/IEC 11801 2nd Ed.: 8-position pin/pair assignment (1-2/3-6/4-5/7-8)

ELECTRICAL

• Insulation Resistance: Min 500 MOhm @ 100 Vdc
• Dielectric Withstanding Voltage:
• 1,000 Vdc/ac peak contact-to-contact @ 60 Hz for 1 min
• 1,500 Vdc/ac peak contact-to-panel @ 60 Hz for 1 min
• Contact Resistance: Max 20 mOhm
• Current Rating: Refer to downloadable spec sheet.

CONSTRUCTION

• Assembly: 4 pairs, 7 strands 28 AWG, F/UTP
• Insulation: High density polyethylene
• Plug Housing: UL listed 94V-0 flame retardant polycarbonate
• IDC Blades: Phosphor bronze, min 50 μin of gold plating over 100 μin of nickel in contact area
• Screen: Brass alloy plated with 100 Iin of nickel
• Jacket:
• Dimensions: Diameter < 0.25 in (6.35 mm)
• Material: Flame retardant PVC compound

MECHANICAL

• Retention: 50 N (11 lbf) for 60 ± 5 s
• Mating Cycle Life: Min 750 cycles
• Tensile Strength: ≥ 20 N per wire

ENVIRONMENTAL CONDITIONS

• Operating Temperature: 14 °F to 140 °F (-10 °C to 60 °C)
• Storage Temperature: -40 °F to 158 °F (-40 °C to 70 °C)
• Operating RH: 93% Max (non-condensing)

COMPLIANCE

• ANSI/TIA/EIA-568-C.2, ISO/IEC 11801 2nd Ed., FCC Part 68, UL 1863, UL 94V-0

APPLICATIONS

• X.21, V.11, S0, ISDN, CSMA/CD 10BASE-T, 100BASE-TX, 100BASE-T4, 100BASE-T2,
• 1000BASE-T, 10GBASE-T, TR 4/16/100, 100BASE-VG, ATM LAN 25/51/155, TP-PMD

WARRANTY

• 5-year Limited Component
• 10-year Signamax Base Trunk
• 15-year Signamax Extended Component
• 25-year Signamax Cabling System