Cat 6A U/UTP Patch Cord Snag-Proof Boot, Black, 7 Ft. - Signamax C6A-114BK-7FB

The Signamax Category 6A Unscreened Patch Cords have been designed to meet the need for today’s high-bandwidth applications. These patch cords incorporate a slim profile snag-free boot design which protect the plug latch and offers greater flexibility. The cords are 100% transmission tested and support category 6A component level performance.

Manufactured using ETL verified 26-AWG stranded cable design to support a greater service life. Assembled in a controlled environment to ensure consistent quality, these patch cords provide reliable performance when mated with any category 6A connecting hardware and deliver supreme performance for network cabling systems.

Key Features

• Meets ANSI/TIA-568-C.2 transmission performance specifications
• Meets IEEE 802.3an 10-Gigabit Ethernet transmission requirements
• 100% factory transmission tested per ANSI/TIA-568-C.2 to ensure category 6A component level performance
• ETL verified unscreened 26 AWG stranded cable
• Rated for 750 plug insertions for high level system reliability
• Enhanced plug-to-jack connection integrity
• Seven standard lengths & six jacket colors
• Slim-profile & snag-free boot designed for the highest density applications

Specifications

TRANSMISSION PERFORMANCE

• ANSI/TIA-568-C.2: meets or exceeds category 6A (1-500 MHz) specifications

TRANSMISSION MEDIA

• 4-pair stranded unscreened twisted pair (UTP)

WIRING SCHEME

• ANSI/TIA-568-C.2: T568A & T568B
• ISO/IEC 11801 2nd Ed.: 8-position pin/pair assignment (1-2/3-6/4-5/7-8)

ELECTRICAL

• Insulation Resistance: Min 500 MOhm @ 100 Vdc
• Dielectric Withstanding Voltage: 1,000 Vdc/ac peak contact-to-contact @ 60 Hz for 1 min
• Contact Resistance: Max 20 mOhm
• Current Rating: Refer to downloadable spec sheet.

CONSTRUCTION

• Assembly: 4 pairs, 7 strands 26 AWG, UTP
• Insulation: High density polyethylene
• Plug Housing: UL listed 94V-0 flame retardant polycarbonate
• IDC Blades: Phosphor bronze, min 50 μin of gold plating over 100 μin of nickel in contact area
• Jacket:
• Dimensions: Diameter < 0.25 in (6.35 mm)
• Material: Flame retardant PVC compound

MECHANICAL

• Retention: 50 N (11 lbf) for 60 ± 5 s
• Mating Cycle Life: Min 750 cycles
• Tensile Strength: ≥ 20 N per wire

ENVIRONMENTAL CONDITIONS

• Operating Temperature: 14 °F to 140 °F (-10 °C to 60 °C)
• Storage Temperature: -40 °F to 158 °F (-40 °C to 70 °C)
• Operating RH: 93% Max (non-condensing)

COMPLIANCE

• ANSI/TIA/EIA-568-C.2, ISO/IEC 11801 2nd Ed., FCC Part 68, UL 1863, UL 94V-0

APPLICATIONS

• X.21, V.11, S0, ISDN, CSMA/CD 10BASE-T, 100BASE-TX, 100BASE-T4, 100BASE-T2, 1000BASE-T, 10GBASE-T, TR 4/16/100, 100BASE-VG, ATM LAN 25/51/155, TP-PMD

WARRANTY

• 5-year Limited Component
• 10-year Signamax Base Trunk
• 15-year Signamax Extended Component
• 25-year Signamax Cabling System