Cat 6A Screened Toolless Keystone Jack - Signamax KJS458TL-C6AC

The Signamax Category 6A Screened Toolless Keystone Jacks have been designed to meet the need for today’s high-bandwidth applications. These connectors are slim in profile for the highest density applications and terminate with the integrated termination cap of the connector.

The contact design provides enhanced plug-to-jack connection integrity and protects against damage caused by insertion of 4 or 6 position plugs. This screened toolless jack is also rated for a minimum of 750 plug insertions providing for the highest level of system reliability.

Key Features

• Exceeds ANSI/TIA-568-C.2 component performance specifications
• Meets IEEE 802.3an 10 Gigabit Ethernet transmission requirements
• Overall solid-metal shielding design for 360-degree screen coverage
• Integrated toolless termination cap eliminates the need of any special tools
• Improved wire retention and ease of termination with rear 110 type contacts
• Easy-to-read T568A/B wiring scheme color-code label
• Compatible with Signamax screened snap-in patch panels and work area faceplates

Specifications

TRANSMISSION PERFORMANCE

• ANSI/TIA-568-C.2: exceeds category 6A (1-500 MHz) component specifications

TRANSMISSION MEDIA

• Unscreened (U/UTP) or screened (U/STP, F/UTP, F/STP, S/UTP, S/STP, SF/UTP, SF/STP) twisted pair
• Cable Diameter:
• Min: 0.20″ (5 mm)
• Max: 0.35″ (9 mm)

JACK TYPE

• 8p8c (8-position, 8-contact) “RJ45” style

WIRING SCHEME

• ANSI/TIA-568-C.2: T568A & T568B
• ISO/IEC 11801 2nd Ed.: 8-position pin/pair assignment (1-2/3-6/4-5/7-8)

WIRE GAUGE

• 22 to 24 AWG (0.644 to 0.511 mm)

ELECTRICAL

• Insulation Resistance: Min 500 MOhm @ 100 Vdc
• Dielectric Withstanding Voltage:
• 1,000 Vdc/ac peak contact-to-contact @ 60 Hz for 1 min
• 1,500 Vdc/ac peak contact-to-panel @ 60 Hz for 1 min
• Spring Wire Contact Resistance: Max 20 mOhm
• IDC Contact Resistance: Max 2.5 mOhm
• Current Rating: Refer to downloadable spec sheet.

CONSTRUCTION

• Housing: Zinc-alloy (fully shielded)
• Grounding post for 2.5 x 0.5 mm (0.110 x 0.020 in) female disconnect.
• Jack Spring Wire: Phosphor bronze alloy plated with 50 μin of gold over 70 to 100 μin of nickel
• IDC: 110 type, phosphor bronze alloy with 100 μin 100% tin alloy

MECHANICAL

• Total Contact Force: Min 800 g for 8 wire leads
• Retention: 50 N (11 lbf) for 60 ± 5 s
• Mating Cycle Life: Min 750 cycles

FOOTPRINT

• Standard keystone footprint

MOUNTING DIMENSIONS

• 1.67” D x 0.58” W x 1.02” H (42.4 mm x 14.6 mm x 25.8 mm)

ENVIRONMENTAL CONDITIONS

• Operating Temperature: 14 °F to 140 °F (-10 °C to 60 °C)
• Storage Temperature: -40 °F to 158 °F (-40 °C to 70 °C)
• Operating RH: 93% Max (non-condensing)

COMPLIANCE

• ANSI/TIA-568-C.2, IEC 60603-7, FCC Part 68 Subpart F, UL 94V-0

APPLICATIONS

• X.21, V.11, S0, ISDN, CSMA/CD 10BASE-T, 100BASE-TX, 100BASE-T4, 100BASE-T2, 1000BASE-T, 10GBASE-T, TR 4/16/100, 100BASE-VG, ATM LAN 25/51/155, TP-PMD

WARRANTY

• 5-year Limited Component
• 10-year Signamax Base Trunk
• 15-year Signamax Extended Component
• 25-year Signamax Cabling System