VG MT-Series Keystone Jacks, USOC, Light Ivory, 25-Pack - Signamax KJ126MT25-C3U

The Signamax Voice-Grade MT-Series Keystone Jacks have been designed to support voice-transmission network applications and low-speed data-transmission applications. These connectors are slim in profile for high density applications and have the ability to mount either color-coded icons for service identification or dust covers to protect unused jacks from dust and other contaminants.

Special design features allow these jacks to be terminated with a standard 110 single-position tool or with the Signamax four-pair tool. The connector contact design provides enhanced plug-to-jack connection integrity, protects against damage caused by insertion of 4- or 6-position plugs, and is rated for a minimum of 750 plug insertions providing for the highest level of system reliability.

Key Features

• Exceeds TIA-568-C.2 category 3 specifications for individual pairs
• Slim profile for the high density applications
• Improved wire retention and ease of termination with rear 110 type contacts
• Easy-to-read 3-pair USCO wiring scheme color-code label
• Compatible with Signamax screened snap-in patch panels and work area faceplates
• Circuit identification icons, dust covers, and 110 protection caps included in kit

Specifications

TRANSMISSION PERFORMANCE

• ANSI/TIA-568-C.2: meets or exceeds individual pair category 3 (up to 16 MHz) component specifications

TRANSMISSION MEDIA

• Unscreened twisted pair (U/UTP)

JACK TYPE

• 6p6c (6-position, 6-contact) “RJ12” style

WIRING SCHEME

• Three-pair USOC

WIRE GAUGE

• 22 to 24 AWG (0.644 to 0.511 mm)

ELECTRICAL

• Insulation Resistance: Min 500 MOhm @ 100 Vdc
• Dielectric Withstanding Voltage: 1,000 Vdc/ac peak contact-to-contact @ 60 Hz for 1 min
• Spring Wire Contact Resistance: Max 20 mOhm
• IDC Contact Resistance: Max 2.5 mOhm
• Current Rating: Refer to downloadable spec sheet.

CONSTRUCTION

• Housing: High impact thermoplastic, UL94V-0 fire retardant
• Jack Spring Wire: Phosphor bronze alloy plated with 50 μin of gold over 70 to 100 μin of nickel
• IDC: 110 type, phosphor bronze alloy with 100 μin 100% tin alloy

MECHANICAL

• Retention: 50 N (11 lbf) for 60 ± 5 s
• Mating Cycle Life: Min 750 cycles

FOOTPRINT

• Standard keystone footprint

MOUNTING DIMENSIONS:

• 1.18” D x 0.67” W x 0.76” H (30.0 mm x 16.9 mm x 19.3 mm)

ENVIRONMENTAL CONDITIONS

• Operating Temperature: 14 °F to 140 °F (-10 °C to 60 °C)
• Storage Temperature: -40 °F to 158 °F (-40 °C to 70 °C)
• Operating RH: 93% Max (non-condensing)

COMPLIANCE

• ANSI/TIA-568-C.2, IEC 60603-7, FCC Part 68 Subpart F, UL 94V-0

APPLICATIONS

• X.21, V.11, S0/S1/S2 (ISDN BRI/PRI), ADSL, VDSL, TR-4, TR-16

WARRANTY

• 5-year Limited Component
• 10-year Signamax Base Trunk
• 15-year Signamax Extended Component
• 25-year Signamax Cabling System