Key Features
- Industrial-grade plugs are IP67-rated (complete protection against dust, protection against the effects of temporary immersion up to 1 m [3 ft])
- Available in IP67-plug-to-IP67-plug and IP67-plug-to-modular plug designs
- 100% factory transmission tested to component performance per ANSI/TIA-568-C.2 specifications
- Durable flexible cable strain relief
- T568A/B wiring scheme compatible
- Snag-free boots on modular plugs of the IP67-plug-to-modular plug design
- Contact design provides enhanced plug to jack connection integrity
- Industrial-grade plugs are equipped with dust caps to prevent exposure of unplugged connectors
- Rated for at least 750 plug insertions providing for the highest level of system reliability
Specifications
TRANSMISSION PERFORMANCE
ANSI/TIA-568-C.2: category 6A (1-500 MHz) specifications
ANSI/TIA-568-C.2: category 6 (1-250 MHz) specifications (100% tested) WIRING SCHEME
ANSI/TIA-568-C.2: T568A & T568B
ISO/IEC 11801 2nd Ed.: 8-position conductor/pair assignment (1-2/3-6/4-5/7-8) CORD CONSTRUCTION
– 4 stranded 26-AWG copper pairs in thermoplastic insulation, High-Density Polyethylene outer jacket
– high-impact clear polycarbonate 8p8c plugs – IP67-rated industrial-grade thermoplastic plug housings – thermoplastic boots – thermoplastic strain relief PLUG
Contacts: phosphor bronze, min 50 μin of gold plating over 100 μin of nickel in contact area
Insulation resistance: min 500 MOhm @ 100 Vdc Dielectric withstanding voltage: 1,000 Vdc/ac peak contact to contact @ 60 Hz for 1 min Contact resistance: max 20 mOhm Current rating: see figure Assembly: FCC Part 68 Subpart F Housing: UL listed 94V-0 flame retardant polycarbonate Retention: 50 N (11 lbf) for 60±5 s Mating cycle life: min 750 cycles Tensile strength: ≥ 20 N per wire INDUSTRIAL PLUG HOUSING
– industrial-grade high-impact flame-retardant thermoplastic
– UL 94V-0 rated – IP67 rated (complete protection against dust, protection against the effects of temporary immersion up to 1 m (3 ft)) CABLE
CONDUCTOR:
Material bare copper Size 26 AWG stranded (7 x 34 AWG strands per conductor) INSULATION:
Color coding: blue/white-blue orange/white-orange green/white-green brown/white-brown SHEATH:
Diameter: < 5.58 mm (0.22 ± 0.01 in) Color: Black Tensile strength: > 400 N (90 lbf) Min. bend radius: 25 mm (1 in) recommended SHIELDS:
Overall sheild of 38 AWG tinned copper braid. Aluminized polyester foil shield ENVIRONMENTAL CONDITIONS
Storage: -40 °C – +70 °C (-40 °F – +158 °F)
Operation: -40 °C – +75 °C (-40 °F – +167 °F) RH (operation): max non-condensing 93 % COMPLIANCE
ANSI/TIA-568-C.2, IEC 60603-7, IEC 61156-6, IEC 60332-1-2, FCC Part 68 Subpart F, UL 94V-0, RoSH
APPLICATIONS
X.21, V.11, S0, ISDN, CSMA/CD 10BASE-T, 100BASE-TX, 100BASE-T4, 100BASE-T2, 1000BASE-T, 10GBASE-T (up to 55 m (180 ft)), TR 4/16/100, 100BASE-VG, ATM LAN 25/51/155, TP-PMD
WARRANTY
5-year limited component warranty
10-year Signamax Link/Channel Warranty 15-year Signamax Extended Component Warranty 25-year Signamax Cabling System Warranty