Intercom Amplifier - Radio Design Labs ST-IC1

Name: Intercom Amplifier - Radio Design Labs ST-IC1
Brand: RDL
SKU: RDLST-IC1
Price: 186.74 USD
Availability: PreOrder

SKU: RDLST-IC1

Manufacturer: RDL

Not Rated Yet

MSRP: $248.98

Price: $186.74

Save $62.24 off MSRP

Price / COM_VIRTUEMART_UNIT_SYMBOL_each:

Ships from manufacturer

Intercom Amplifier

My Project List

Description
Documents
Reviews
Accessories
Related Products
Diagram

The ST-IC1 is the ideal choice where an intercom system is to be installed, or where an amplifier is needed to bring a mic level up to a 1 W speaker level with optional muting capability.

The ST-IC1 has one input, one output and two muting control terminals.

The input accepts a dynamic mic, a condenser mic (a phantom supply input terminal is provided to power condenser mics), an 8 Ω speaker or a 45 Ω speaker. The gain range of the module is sufficient to accommodate this wide variety of source levels.

The output is ground-referenced, and drives more than 1 watt RMS into an 8 Ω load. The output circuit can be connected to any load impedance of 4 Ω or greater.

Specifications

Input:

>600 Ω balanced

Frequency Response:

300 Hz to 4 kHz (± 2 dB, filtered for voice band intelligibility)

Gain:

Off to 70 dB (adjustable)

Input level for 1 W RMS output:

-60 dBu (8 Ω source); -55 dBu (600 Ω source)

THD+N:

< 1% (1 kHz, referred to 1 W @ 50 dB gain)

Residual Noise (below 1 W):

< 75 dB (60 dB gain setting, unmuted)

Maximum Output Power:

1.5 W RMS (before clipping)

Mute Inputs (2):

Trigger on high to low transition, 2 mA, 15 V pullup; Trigger on low to high transition, 0.1 mA

Mute Attenuation:

> 115 dB (1 kHz)

Mute Switching Type:

Solid-State, no relay contacts used

Mute Release Delay:

15 ms

Ambient Operating Environment:

0° C to 40° C

Power Requirement:

GROUND-REFERENCED, 24 Vdc @ 175 mA

Dimensions:

Height: 0.7 in. (7.7 cm), Width: 3 in. (7.6 cm), Depth: 1.6 in. (3.9 cm)

Package Type:

Cardboard Box

Package Dimensions:

2 x 2 x 4 in.

Shipping Weight:

0.185 lbs.

WEEE weight:

0.13 lbs.

Tariff code:

8543.70.9960

Datasheet

Write Review

There are yet no reviews for this product.

Manufacturer: RDL

Related Products

25^%
OFF

Utility Audio Amplifier - 2 Watt - Radio Design Labs ST-PA2

SKU: RDLST-PA2

Manufacturer: RDL

Call us: 480-268-9259

Intercom Amplifier - Radio Design Labs ST-IC1

Specifications

There are yet no reviews for this product.

Accessories

STICK-ON Mounting Plate - Radio Design Labs SMK-12

STICK-ON Series Mounting Rack - 10 Modules - Radio Design Labs SR-10

STICK-ON Series Mounting Rack - 12 Modules - Radio Design Labs SR-12A

Mounting Bracket for 4 STICK-ON Modules - Radio Design Labs ST-PBR4

Rear rack rail mounting kit for any STICK-ON module - Radio Design Labs ST-RRB1

STICK-ON Series Racking System - 12 Modules - Radio Design Labs STR-19A

STICK-ON Series Racking System - 10 Modules - Radio Design Labs STR-19B

10.4" Rack Mount for 6 STICK-ON Series Products - Radio Design Labs STR-H6A

STICK-ON Series Detachable Terminal Block - Radio Design Labs DTB

Detachable Mounting Kit - Radio Design Labs DMK-5

Mounting Kit - ST and TX Series - Radio Design Labs MB-1

STICK-ON Series Mounting Rack - 7 Modules max. - Radio Design Labs SR-4

STICK-ON DIN Rail Adapter - Radio Design Labs DRA-35S

STICK-ON DIN Rail Adapter - Radio Design Labs DRA-35S6

Related Products

Utility Audio Amplifier - 2 Watt - Radio Design Labs ST-PA2

Shop By Category

Recently Viewed

Intercom Amplifier - Radio Design Labs ST-IC1

Shop Securely