0
Shopping cart
There are no products in your cart.
 

Bi-Directional Mic/Line Dante Interface 2 x 2 w/PoE - 1 XLR In and 1 Mini-jack In, 2 Out on Rear-Panel Terminal Block - Black - Radio Design Labs DDB-BN2ML

SKU: RDLDDB-BN2ML
Manufacturer: RDL
Not Rated Yet
MSRP: $943.77
Price: $707.83
Save $235.94 off MSRP
Price / COM_VIRTUEMART_UNIT_SYMBOL_each:
Ships from manufacturer
Bi-Directional Mic/Line Dante Interface 2 x 2 w/PoE - 1 XLR In and 1 Mini-jack In, 2 Out on Rear-Panel Terminal Block - Black

The DDB-BN2ML is a complete wall-mounted Dante audio network interface. It features one XLR mic or line input and one mono-summed Mini-jack line input on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DDB-BN2ML. The XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. The Mini-jack input accepts mono or stereo unbalanced line-level sources that are summed to mono. Each rear-panel output provides a switch to set the output to balanced professional or unbalanced consumer level. The DDB-BN2ML fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DDB-BN2ML is PoE powered, and is available in multiple finishes with optional customized graphics.

The XLR input is converted to feed one Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels.

The Mini-jack left and right inputs are summed to mono to feed one Dante network transmit channel. This input provides a network digital audio level of -20 dBFS for an unbalanced -10 dBV input.

Two Dante audio channels are converted to balanced line level on the rear-panel detachable terminal block. Each output provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to unbalance the audio and attenuate the level to -10 dBV. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit.

The rear-panel outputs are intended for connection to RDL AMS connectors mounted in Decora-style plates that match the DDB-BN2ML. AMS audio connectors include RCA, Mini and XLR jacks. The output plate may be located together with the DDB-BN2ML in a triple gang box or may be mounted remotely in a single box.

Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit.

The DDB-BN2ML is a professional grade product with a discrete mic preamplifier for studio quality fidelity and low noise performance, coupled through a metal XLR jack housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates.

The DDB-BN2ML’s superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.

Specifications

Network Connector:
RJ45 with Link and Speed indicators

Digital Audio Ethernet Protocol:
Dante

Transmission Rate:
100 Mbps

Sample Rates Supported:
44.1 kHz, 48 kHz (default)

Bit Depth Supported:
24 bits

Audio Operating Level:
-20 dBFS = +4 dBu

Reference Level:
0 dBFS = +24 dBu


Mic/Line Input to Network Interface

Input:
XLR (female)

Gain:
Mic: 40 dB (LO), 48 dB (MED), 62 dB (HI); Line: Unity (LO), 8 dB (MED), 19 dB (HI)

Input Level (for +4 dBu/-20 dBFS):
Mic: -36 dBu (LO), -44 dBu (MED), -58 dBu (HI); Line: +4 dBu (LO), -8 dBu (MED), -15 dBu (HI)

Input Level (maximum):
Mic: -16 dBu (LO), -24 dBu (MED), -38 dBu (HI); Line: +24 dBu (LO), +12 dBu (MED), +5 dBu (HI)

Input Impedance:
> 2.5 kΩ (MIC); > 5 kΩ (LINE)

Phantom Power:
P48, 48 Vdc, switch-selectable

Standard for Phantom:
IEC 61938: 2013

Selectors for input (3):
Phantom, Mic/Line, Gain

Frequency Response:
20 Hz to 20 kHz (± 0.5 dB)

Equivalent Input Noise:
-130 dBu (62 dB gain); -132 dBu A-Weighted

Noise below -20 dBFS (20 to 20 kHz):
Mic: < -72 dB (LO), < -72 dB (MED), < -68 dB (HI);  Line: < -72 dB (LO), < -72 dB (MED), < -70 dB (HI)

THD+N:
< 0.1% (20 Hz to 20 kHz, +4 dBu/-20 dBFS); 0.015% at 1 kHz (typ)

CMRR:
> 65 dB (50 Hz to 120 Hz)

Crosstalk:
Below Noise Floor (20 Hz to 20 kHz at operating level, any input to any input, max. mic gain)

Headroom:
20 dB


Line Input to Network Interface

Input:
Mini-jack Stereo (left and right summed to mono)

Input Level (for +4 dBu/-20 dBFS):
-10 dBV nominal

Input Level (maximum):
+10 dBV

Input Impedance:
> 50 kΩ

Frequency Response:
20 Hz to 20 kHz (± 0.2 dB)

Noise below -20 dBFS (20 to 20 kHz):
< -85 dB

THD+N:
< 0.05% (20 Hz to 20 kHz, +4 dBu/-20 dBFS); 0.01% at 1 kHz (typ)

Headroom:
20 dB


Network to Line Outputs

Outputs (2):
Balanced, detachable terminal block

Output Level (operating):
+4 dBu (nominal) balanced; -10 dBV (nominal) unbalanced, switch-selectable

Output Level (maximum):
+24 dBu balanced; +10 dBV unbalanced

Output Impedance:
150 Ω balanced; 2.5 kΩ unbalanced

Frequency Response:
20 Hz to 20 kHz (± 0.5 dB)

THD+N:
< 0.1%

THD:
< 0.01% (1 kHz)

Noise:
< -80 dB (below +4 dBu or -10 dBV); < -100 (below +24 dBu)

Crosstalk:
Below Noise Floor (20 Hz to 20 kHz at operating level, output to output)

Headroom above +4 dBu or -10 dBV:
20 dB


Indicators (4):

Ethernet Link and Speed (2, rear panel); Sync and Power (2, front panel)

Ambient Operating Environment:
0° C to 40° C; 30° C maximum recommended

Power Requirement:
PoE Class 0, IEEE 802.3af

Specification Conditions:
Gain/Level: ± 1 dB; Source termination: 150 Ω; A to D values measured in digital domain

Dimensions:
3.52" (8.94 cm) W; 4.11" (10.44 cm) H; 2.09" (5.31 cm) D

Package Type:
Cardboard Box

Package Dimensions:
3.625 x 4.625 x 2.125 in.

Shipping Weight:
1.0 lbs.

WEEE weight:
0.845 lbs.

Tariff code:
8543.70.9100


There are yet no reviews for this product.

Accessories

25%
OFF
25%
OFF
25%
OFF
25%
OFF
25%
OFF
25%
OFF
25%
OFF
25%
OFF
25%
OFF
25%
OFF
25%
OFF

Related Products

25%
OFF
25%
OFF
25%
OFF
25%
OFF
25%
OFF
25%
OFF
25%
OFF
25%
OFF
25%
OFF
25%
OFF
25%
OFF
25%
OFF
25%
OFF

Shop By Category

Recently Viewed

Shop Securely

Security Is Our Concern

We take great care in keeping up to date with security measures.

Visa, MasterCard, Discover, American Express
Pay with ApplePay or Google Wallet
Powered by Stripe