0
Shopping cart
There are no products in your cart.
 

Network to Audio Interface - Dante - Radio Design Labs AV-NL2

SKU: RDLAV-NL2
Manufacturer: RDL
Not Rated Yet
MSRP: $574.65
Price: $430.98
Save $143.67 off MSRP
Price / COM_VIRTUEMART_UNIT_SYMBOL_each:
Ships from manufacturer
Network to Audio Interface - Dante

The AV-NL2 is a line-level interface that converts two Dante network audio channels to two balanced audio outputs on XLR connectors. Each channel provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to set the output to line level or attenuate the output by 50 dB to mic level. Special software is not required to configure the module. The AV-NL2 is a professional grade product for studio quality fidelity and low noise performance.

The AV-NL2 may be powered from an external 24 Vdc power supply, available separately. The AV-NL2 is equipped to operate from a PoE enabled network switch. The AV-NL2 will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an AV-NL2, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. Valid power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.

The AV-NL2 is constructed in a durable, professional all-metal enclosure suitable for use on stage or in studio, or mounted to any flat surface. For fixed installations, mounting brackets are included. The chassis is designed to protect the front panel slide switches from accidental damage. This full-featured AV-PAK product is engineered and manufactured in the U.S.A for continuous duty in demanding installations.

Specifications

Network Connector:
RJ45 with Link and Speed indicators

Digital Audio Ethernet Protocol:
Dante

Transmission Rate:
100 Mbps

Sample Rates Supported:
44.1 kHz, 48 kHz (default), 88.2 kHz, 96 kHz

Bit Depth Supported:
24 bits

Audio Operating Level:
-20 dBFS = +4 dBu

Reference Level:
0 dBFS = +24 dBu


Outputs (2):

XLR (male)

Output Level (operating):
+4 dBu nominal LINE level balanced; -45 dBu nominal MIC level (into 150 Ω)

Output Level (maximum):
+24 dBu LINE level

Output Impedance:
< 100 Ω balanced

Selector per output:
Mic/Line

Frequency Response:
20 Hz to 20 kHz (± 0.5 dB)

THD+N:
< 0.1% (20 Hz to 20 kHz,+4 dBu/-20 dBFS); 0.015% at 1 kHz (typ)

Noise:
< -75 dB (below +4 dBu); < -95 (below +24 dBu)

Crosstalk:
Below Noise Floor (1 kHz, output to output); < -60 d5 dB (20 kHz)

Headroom above +4 dBu/-20 dBFS:
20 dB


Indicators (3):

Ethernet Link and Speed (2, rear panel); Sync (front panel)

Ambient Operating Environment:
0° C to 50° C

Power Requirement:
PoE Class 0, IEEE 802.3af

Specification Conditions:
Gain/Level: ± 1 dB

Dimensions:
4.23" (10.74 cm) W; 1.68" (4.27 cm) H; 5.97" (15.16 cm) D

Package Type:
Cardboard Box

Package Dimensions:
7 x 4.375 x 2.25 in.

Shipping Weight:
1.39 lbs.

WEEE weight:
1.17 lbs.

Tariff code:
8543.70.9100


There are yet no reviews for this product.

Shop By Category

Recently Viewed

Network to Audio Interface - Dante - Radio Design Labs AV-NL2

Shop Securely

Security Is Our Concern

We take great care in keeping up to date with security measures.

Visa, MasterCard, Discover, American Express
Pay with ApplePay or Google Wallet
Powered by Stripe