10GBase-T Copper SFP+ Module - Signamax AS50010

Key Features

• SFF-8431 and SFF-8432 MSA Compliant
• Support 10 Gbase-T / 5 Gbase-T / 2.5 Gbase-T / 1000 Base-T
• Hot-pluggable
• Compact RJ-45 connector assembly
• RoHS compliant and lead-free
• Single +3.3V power supply
• Supports 10 Gigabit Ethernet up to 30m over CAT6a/7 cable
• Ambient Operating Temperature: 0°C to +70°C

Specifications

APPLICABLE STANDARDS

• IEEE 802.3an 10GBase-T
• IEEE 802.3bz 5GBase-T, 2.5GBase-T
• IEEE 802.3ab 1000Base-T

3.3V ELECTRICAL POWER INTERFACE

• Supply Current: Typical: 700, Max: 900mA
• Input Voltage: Typical: 3.3, Min: 3.13, Max: 3.47V
• Maximum Voltage: 4V

LOW SPEED SIGNALS

• SFP Output LOW: 0 to 0.5V
• SFP Output HIGH: host_Vcc -0.5 to host_Vcc + 0.3
• SFP Input LOW: 0 to 0.8V
• SFP Input HIGH: 2 to Vcc + 0.3

HIGH SPEED ELECTRICAL INTERFACE

• TRANSMISSION LINE-SFP: 
• Line Frequency: 125MHz
• Tx Output Impedance: 100 Ohm
• Rx Input Impedance: 100 Ohm
• HOST-SFP: 
• Single ended data input swing: 250 to 1200 mV
• Single ended data output swing: 350 to 800 mV
• Rise/Fall Time: 175 psec
• Tx Input Impedance: 50 Ohm
• Rx Ouput Impedance: 50 Ohm

SERIAL COMMUNICATION PROTOCOL

• I 2C Clock Rate : 0 to 200,000Hz

ENVIRONMENTAL CONDITIONS

• Operating Temperature: 0 to 158 °F (0 to 70 °C)
• Storage Temperature: -40 to 185 °F (-40 to 85 °C)
• Operating RH: 5 – 95% (non-condensing)

WARRANTY

• 5 – Year Limited Component