Intelix MARC Room Combine System

Room combining is a common application in conference and convention facilities, houses of worship and hospitality centers. Intelix created a product specifically for such environments--the MARC Room Combine System.

The Intelix MARC Room Combine System is designed specifically for applications with moveable walls. MARC allows you to design, program, and install your sophisticated room combine system in a fraction of the time it would take with other solutions.

The secret is in MARC's embedded logic--all of the logic for routing inputs to outputs, combining and separating rooms, incorporating paging, and managing remote controls is pre-programmed so all you have to do is enter simple data. Plus, the MARC system is flexible enough to allow RS232 and internet control, automatic wall sensors, custom room topologies, and custom remote controls. Design with Intelix and design with intelligence.

The easiest way to prepare an MARC Room Combine System purchase order is to let the MARC Designer Software prepare the document for you. Every time you design a system using Intelix Designer Software, a complete parts list and wiring report is automatically generated, ensuring nothing is overlooked.

1. Specify the MARC Matrix Mixer

   1. Determine the required amount of audio inputs and outputs. Keep in mind that stereo sources/destinations populate two inputs/outputs.

      Round the number of the audio inputs to the nearest derivative of eight and place them within Intelix's part numbering system. 

   2. Specify Control

      1. Determine if wall state changes are automatic or manual.

         1. If automatic, specify Wall Sensors, Wall Status Panels, and a Comet 8-RJ12.

         2. If manual, specify a Room Combine Panel, software, or an RS232 controller.

      2. Determine if in-room remote control is required.

         1. If required, specify Intelix RCS room control stations, individual Comet remotes, or RS232 controllers. If ordering custom RCS remotes (RCS-Custom), specify button labeling. If ordering individual Comet remotes, specify model and mounting type. Specify one Comet power supply (Comet PS) per 12 individual Comet remotes or 4 RCS room control stations.

      3. Determine if logic control is required.

         1. If required, specify one COMET-8-LOGIC.

   3. Specify Enhancement Components

      1. Determine if audio preamplification or phantom power is required.

         1. If required, specify one Mic/Line Card for every eight channels.

      2. To simplify wiring, Intelix recommends Comet-BA4 and Comet-BA11 bridge adaptors.