8 Port Industrial 10/100/1000 PoE+ Switch with 2 100/1000X SFP Ports - Signamax FO-065-7410GPOEP

Signamax 065-7410GPOEP 8-Port Gigabit Industrial PoE+ Switch

The Signamax 10/100/1000 Unmanaged Industrial PoE+ Switches are designed to operate in rugged environments with extreme temperature conditions. There is a choice of a 5 to 8-port 10/100/1000BaseT/TX PoE+ plus 2-100/1000Base SFP ports with the 5-port offering 4-PoE+ ports.

Their extended temperature ranges from -40°F to 167°F (-40°C to 75°C). Both switches are offered in a compact, all-metal IP30 case with built-in DIN-rail mounting. The advantage of PoE+ support allows these switches to handle Pan/Tilt/Zoom for IP security camera requirements.

Features:

• Supports PoE+ (30 watt) Power Source Equipment (PSE)
• MAC address capacity of 8K
• Supports 9.6K bytes jumbo frames
• 2,000 V DC power line EFT protection & 6000 V DC Ethernet ESD protection
• Redundant 48 – 55 V DC terminal block power input
• IP30 protection metal case

Specifications:

• APPLICABLE STANDARDS
  • IEEE 802.3 10BaseT
  • IEEE 802.3u 100BaseTX
  • IEEE 802.3ab 1000BaseT
  • IEEE 802.3z 1000BaseSX/LX
  • IEEE 802.3af PoE (15.4 watt)
  • IEEE 802.3at PoE+ (30 watt)

• PORTS
  • 8 – RJ-45 10/100/1000 Auto-Negotiation, Auto-MDI/MDIX ports
  • 2 –100/1000 Dual Rate SFP ports

• LED STATUS INDICATORS
  • Per Switch: Power Unit: P1 (Green), P2 (Green), fault (Red)
  • Per Port: Ethernet port: Link/Activity (Green), 1000 Mbps; SFP: Link/Activity (Green)

• PERFORMANCE
  • Latency:
  • Throughput, per port: 1.48810 million pps (64-byte packets)
  • Switch Fabric Speed: 20.0 Gbps (non-blocking, wire speed performance)
  • MAC Address Capacity: 8K

• ELECTRICAL CHARACTERISTICS
  • Maximum Total Power Consumption:
    • Full load with 8 ports PoE+ (30 W for each PoE port): 210 Watts @ 48 V, 250 Watts @ 51-55 V

• ENVIRONMENTAL REQUIREMENTS
  • Operating Temperature: -40°F to 167°F (-40°C to 75° C)
  • Storage Temperature: -40°F to 185°F (-40°C to 85° C)
  • Operating Humidity: 5 to 95% (non-condensing)

• PHYSICAL CHARACTERISTICS
  • Dimensions: 1.81" W x 3.85" D x 5.59" H (46 mm x 98 mm x 142 mm)
  • Weight: 1.69 lbs. (766 g.)
  • Housing: IP30 protection, metal case. Pre-attached DIN-rail and wall mounting kit included.

• CERTIFICATIONS
  • Safety: UL 61010
  • EMI: FCC
  • EMS: ESD Standards (IEC 61000-4-2); Radiated FRI Standards (IEC 61000-4-3); Burst Standards (IEC 61000-4-4); Surge Standards (IEC 61000-4-5); Induced RFI Standards (IEC 61000-4-6); Magnetic Field Standards (IEC 61000-4-8); Voltage Dip Standards (IEC 61000-4-11)
  • Environmental Test Compliance: Vibration Resistance (IEC 60068-2-6fc); Shock (IEC 60068-2-27); Free Fall (IEC 60068-2-32 Ed)

• WARRANTY
  • Five Years